![]() 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Loxone Link to the Air Base Extension.1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the LED Power supply to the Air device.1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Miniserver to the Air Base Extension.1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver.1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system.1 x 12 or 24VDC power Supply if required for the LED lights.Should you be using more than one cable, the strain relief can be achieved by adding the supplied cable straps. The RGBW 24V Compact Dimmer is designed in such a way that strain on the connected cable is relieved by the cover cap. For those installations that may not present the chance to pull a cable, Air technology takes care of the wireless communication for intelligent automation and control. Loxone Air is a purpose-developed wireless technology that allows for the incorporation of Real Smart Home functionality within existing homes – whether it’s a refurbishment or renovation. If the installation presents the opportunity to pull cables, then the Tree variant is the way to go. All Tree devices can be paired in no time at all. Thanks to a free-form wiring topology, the commissioning of Loxone Tree is efficient and effective. The award-winning Loxone Tree technology was designed with a clear goal in mind: reduce the cable and effort required for all the peripheral devices that make up a Real Smart Home. The RGBW 24V Compact Dimmer is available in the following versions: TREE Thanks to Loxone Air and Tree technology, the RGBW 24V Compact Dimmer improves the ease-of-install of a Real Smart Home by a Loxone Partner. As this dimmer is specifically designed for decentralized use, it could easily be installed at the location of the LED Strip recessed into furniture or cabinetry, under the bed, or directly in a dropped or coffered ceiling. Ith the RGBW 24V Compact Dimmer, you now have more choices when it comes to potential installation places for your lighting fixtures or strips. This creates unique lighting moods that can completely change the look and feel of a room! More lighting possibilities This driver includes the control for 0-100% dimming and the ability to adjust colors. The 24V RGBW Compact Dimmer allows for easy control of color-changing lighting such as the RGBW LED Strip. Smart devices do not use the fade rate from the configuration (it is set to "Jump" and perception correction is always active), because the fade is transmitted with each command.Impressive control for impressive lighting White: Fade Rate in % (0%=Jump), Bit 7: Gamma/Perception correction active Green: Fade Rate in % (0%=Jump), Bit 7: Gamma/Perception correction activeīlue: Fade Rate in % (0%=Jump), Bit 7: Gamma/Perception correction active Red: Fade Rate in % (0%=Jump), Bit 7: Gamma/Perception correction active White: Loss of connection value in % (101% = Retain Last State) Green: Loss of connection value in % (101% = Retain Last State)īlue: Loss of connection value in % (101% = Retain Last State) ![]() Red: Loss of connection value in % (101% = Retain Last State) So, it can strangely be disabled independently. If bit 3 is set, it is disabled for white. If any of the bits 0-2 are set, fading is disabled for RGB. The standard devices always use the fade rate, but it can be disabled by setting bit 0 to bit 3 in B1 (for the four RGBW components). The fade time is either in 1/10s (bit 14=0) or in seconds (bit 14=1). Smart Device have a fade time, which is managed by the device. Standard Device with 4 individual channels:Ĭhanges in the same cycle will be transmitted as one message! TypeĤ bytes (RGBW) in value32 for standard devicesĤ bytes (RGBW) in value32 for smart devices It seems the frequency can not be changed, but the software would support that. The dimming is updated at a fixed frequency between 123Hz and 1kHz. LED Surface Mount Spot WW Tree (0x800e).LED Surface Mount Spot RGBW Tree (0x8007).All LED devices seem to share the same protocol, so I document them all in one document.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |